The new computer is assembled can be tested by running the BIOS setup program. How to perform tests with the BIOS program as follows:
1. Turn on the monitor and system unit. Note the display monitor and the sound from the speakers.
2. FOST program of the BIOS will automatically detect the hardware installed dikomputer. If there are errors then the monitor display is blank and the speaker emits an audible as an indication of an error code. Check the reference BIOS code to find the error indication is meant by the beep code.
3. If no error occurs then the monitor displays the POST execution of the program. ekan BIOS interrupt buttons as instructed on the screen to enter the BIOS setup program.
4. Check all the hardware detection by the BIOS setup program. Some settings may have changed in value, especially the capacity of hard drives and boot sequence.
5. Save the changes to the settings and exit the BIOS setup.
After exiting the BIOS setup, the computer will load the operating system with appropriate search order settings in the BIOS boot sequence. Insert the bootable diskette or CD containing the operating system to drive the search.
AND
0 komentar:
Posting Komentar